2.0 IFP FRONT & REAR SHOCKS KIT for FORD F-250 4×4, 2021 (Front 0 in. to 1.5 in./ Rear 0 in. To 2 in. Lift)

Weight 135 lbs
Dimensions 40 × 12 × 24 in
Part Number

Product Line

TRUCKS

Vehicle Make

Vehicle Model & Year

Position

Primary Intended Use

Product Model

Body Diameter & Material

Type

Reservoir Configuration

Adjustments

N/A

Vehicle Geometry

Lift Range (vs. stock)

Factory Preset Lift (vs. stock)

Extended Length

F 20.47 in. / R 29.76 in.

Compressed Length

F 13.50 in. / R 18.35 in.

Stroke

F 6.97 in. / R 11.42 in.

Spring P/N

N/A

Spring Rate

N/A

Spring Length

N/A

Spring Inner Diameter (ID)

Spring Outer Diameter (OD)

Unit of sale (sold as)

sku

Increase the off-road capabilities while improving the comfort and handling of your F-250

The 2.0 IFP shocks provide the optimal combination of:

  • Firm and stable handling for driving on desert and fire roads (sports car feeling);
  • Plush compliance while off-road driving over washboard;
  • Strong ramping effect for extra bottom-out protection over large dips and washes;
  • Maximum articulation and traction for rock climbing.

BENEFITS

  • High-performance off-road capabilities
  • Improved handling and comfort for casual driving
  • Better traction
  • Provides leveling capabilities for better weight distribution
  • Increased protection against bottoming-out

RIDE ENHANCEMENTS

  • Spring setup optimized for each setup
  • Better attenuation of vibration, leading to major noise reduction in the cabin (much less squeak and rattle)
  • Damping characteristics optimized for each truck and setup, providing a smoother ride
  • Increased comfort in both on road and off-road conditions, especially over washboard and square-edge impacts
  • More stable and more predictable handling
  • Reduced front-end diving when cornering or braking
  • Reduced rear-end bucking and lifting
  • Increased damping and spring rate for better handling when towing or loading truck

TECHNICAL FEATURES

  • Massive 2.0 in. (46mm) hard-anodized aluminum body for cooler operation
  • Gas-pressurized design with internal floating piston to prevent cavitation and fading
  • Internal hydraulic valving optimized for each vehicle platform
  • Built from CNC-machined and forged aluminum parts, aluminum bodies and premium-quality internal components
  • Heavy-duty 3/4 in. (19mm) induction-hardened shaft
  • Triple sealing system with dust wiper, high-pressure step-seal and premium quality o-ring
  • Direct, bolt-on replacement that uses stock shocks location
  • Proprietary ultra-low friction, light viscosity semi-synthetic oil blend, ultra-resistant to high operating temperature
  • Coilover models use Elka’s durable high-tensile alloy springs or Eibach springs (depending on model & configuration)
  • Fully rebuildable using affordable replacements parts and springs, multiple replacement valving shim stacks available

The 2.0 IFP model is a simple bolt-on upgrade over OEM shocks. They are a gas-pressurized design with internal floating piston to help prevent cavitation and fading.

This configuration is for use with stock geometry and can accommodate 0 in. to 2 in. of lift with either stock or aftermarket upper control arms.

Ride height is preset from our factory at approximately 1.5 in. of lift for a stock truck with stock tires, actual ride height may vary depending on wheels dimensions and upper control arms used.

Package includes two (2) side-specific rear shocks
 

$2,199.98

Title

Go to Top