2.0 IFP FRONT & REAR KIT SHOCKS for JEEP WRANGLER (JL), 2018 to 2024 (except hydrid models) (JL, 2 in. to 3 in. lift)

Weight 46 lbs
Dimensions 40 × 12 × 16 in
Part Number

Product Line


Vehicle Make

Vehicle Model & Year


Primary Intended Use

Product Model

Body Diameter & Material


Reservoir Configuration



Vehicle Geometry

Lift Range (vs. stock)

Factory Preset Lift (vs. stock)

Extended Length


Compressed Length




Spring P/N


Spring Rate


Spring Length


Spring Inner Diameter (ID)

Spring Outer Diameter (OD)

Unit of sale (sold as)


Increase the off-road capabilities while improving the comfort and handling of your Jeep

The 2.0 IFP shocks provide the optimal combination of:

  • Firm and stable handling for driving on desert and fire roads (sports car feeling);
  • Plush compliance while off-road driving over washboard;
  • Strong ramping effect for extra bottom-out protection over large dips and washes;
  • Maximum articulation and traction for rock climbing.


  • High-performance off-road capabilities
  • Improved handling and comfort for casual driving
  • Better traction
  • Increased protection against bottoming-out


  • Better attenuation of vibration, leading to major noise reduction in the cabin (much less squeak and rattle)
  • Damping characteristics optimized for each Jeep model, providing a smoother ride
  • Increased comfort in both on road and off-road conditions, especially over washboard and square-edge impacts
  • More stable and more predictable handling
  • Reduced front-end diving when cornering or braking
  • Reduced rear-end bucking and lifting


  • Massive 2.0 in. (46mm) hard-anodized aluminum body for cooler operation
  • Gas-pressurized design with internal floating piston to prevent cavitation and fading
  • Internal hydraulic valving optimized for each vehicle platform
  • Built from CNC-machined and forged aluminum parts, aluminum bodies and premium-quality internal components
  • Heavy-duty 5/8 in. (16mm) induction-hardened chrome-plated steel shaft
  • Triple sealing system with dust wiper, high-pressure step-seal and premium quality o-ring
  • MCU external bottom-out bumper
  • Direct, bolt-on replacement that uses stock shocks location
  • Proprietary ultra-low friction, light viscosity semi-synthetic oil blend, ultra-resistant to high operating temperature
  • Fully rebuildable using affordable replacements parts and springs, multiple replacement valving shim stacks available

The 2.0 IFP model is a simple bolt-on upgrade over OEM shocks. They are a gas-pressurized design with internal floating piston to help prevent cavitation and fading.

This configuration is for use exclusively with stock geometry or with aftermarket lift kits and accommodate between 0 in. to 1.5 in. of lift. This kit does not provide lift and does not include any springs.

Package includes four (4) position-specific shocks:

  • Two (2) 2.0 IFP front shocks
  • Two (2) 2.0 IFP rear shocks



  • N/A



Go to Top